276°
Posted 20 hours ago

Hosa Balanced Interconnect 1/4 in TRS to Same 10 ft

£1.305£2.61Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

The colors can vary between the signal wires (L/R) so it’s important to use a multimeter to test for continuity between each signal wire and the tip (usually the L audio) and the sleeve (usually the R audio). These cables will help you unlock the true potential of your Roland gear - and they'll look the part too!

All of our products are new unless stated and come with a 30-day money-back guarantee and a 3-year warranty as standard. Oxygen-free copper wiring (with a multi-strand design) and thick spiral shielding deliver excellent signal transfer. For some reason the TRS cable not only corrects that, as expected, it increases the output by enough to notice. A balanced connection can help reduce noise from electromagnetic interference by using a technique that sends two copies of a signal 180 degrees out of phase with each other. Im not that familiar with the DBX, but it looks like it’s only MIC input is the XLR jack and it’s 1/4 TRS is a line level input.Anyway I'm wondering about these questions and then if anyone can please recommend good and best cable options for optimal sound quality with minimal or no sound loss. Featuring high-quality connectors and a low-capacitance design, these cables provide reliable operation and superior sound for every gear connection in your rig. Its balanced quad structure reduces electromagnetic induction resulting in an extremely high-quality low-noise, transparent and accurate studio microphone cable. Multi-strand, oxygen-free copper core wire and high-density spiral shielding ensure perfect signal transfer for connecting pedals, instruments, studio equipment, and more.

Please give us the reason for your assessment in the following text box and – if possible – your e-mail address for further questions. When a device requires a TRS cable, it’s because the application needs a third wire, and it will normally not work correctly if you try to use a TS cable in it’s place. KMR Audio Ltd is a credit broker and is Authorised and Regulated by the Financial Conduct Authority. This professional TRS cable is designed in Brisbane, Titan AV cables use our Tour Ready Oxygen Free Cable to deliver outstanding audio reproduction you can rely on in any live sound, studio or installation environment.Van Damme cables are trusted by professionals and recording studios worldwide including Abbey Road and the BBC. We may see TRS cables referred to as balanced cables for this reason, but it’s a bit misleading because it’s not the cables that are balanced. These areas include (but are not limited to) Isle of Man, Isle of Wight, Isles of Scilly, Jersey, Guernsey, Northern Ireland, Orkney, Scottish Highlands and Shetland. You should have gone a step further to discuss the internal wiring for a TRS cable and how it could be used for additional purposes.

The cables can be used for different applications such as a stereo connection (right/left/ground), a balanced connection (hot/cold/ground), or a voltage divider connection (input/output/ground). If a stompbox has stereo outputs where the R output can be mono to send to a guitar amp, will the left output (TRS) alone send a stereo signal to a PA so it will come out stereo or would it only be 1 of the stereo channels instead of both? The letters TRS stand for Tip, Ring, and Sleeve, and refer to the parts of the jack plug that the different conductors are connected to. TRRS jacks are often used for stereo headsets with microphones where four conductors are needed for ground, left channel, right channel, and mic.I use it to connect one of my effects to an expression pedal and thus it really has a tough life being used in every gig. I understand the function of a TRS cable for connecting stereo to mono (I have that with my accordion, where the left and right side signals come out on and TRS jack, and split to 2 mono cables. Stereo outs of a Nord/Spdsx to 1 channel of an audio interface on to a Stereo Channel in the DAW using a Insert/Y Cable would still give me the stereo image? When I tried connecting the Line 6 hx effect to the Fuchs to change channels I get a terrible feedback. Andertons Music Company acts as a credit broker and not a lender and only offers credit products from Secure Trust Bank PLC trading as V12 Retail Finance.

I was told that RCA cables aren’t good for long runs and that I should use balanced cables and possibly even baluns at each end for a good clean signal. We advise you to update to a currently supported browser (such as Chrome, Edge, or Firefox) to improve your security, speed, and overall experience. Complete with high-quality 1/4'' and TRS connectors, plus a low-capacitance design, these cables guarantee reliable operation and superior sound for every connection in your setup. The black band between them is an insulator preventing the two parts of the jack from shorting together.

A low-capacitance build and premium-grade connectors ensure the best possible sound and optimal, reliable performance. They can also be used to connect stereo signals between equipment where device A uses separate jacks for left and right channels, and device B uses a combined TRS jack. Complete with high-quality 1/4" and TRS connectors, plus a low-capacitance design, these cables guarantee reliable operation and superior sound for every connection in your setup. Featuring a multi-strand, oxygen-free copper core wire and high-density spiral shielding, Black Series cables ensure perfect signal transmission for connecting pedals, instruments, studio equipment and more.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment