Supreme Landscaping Products Jointing Compound Stone Grey Easy Joint 12.5 Kilo Patio Mortar
About this deal
To remove any debris, algae, lichen or fungi from your paving slabs and joints, use a light pressure wash over the surface (no more than once a year, using a “fan” type nozzle no closer than 150mm/6 inches from the surface).
It is also worth pointing out that because dirty surface water can drain through the joint, over time it will result in a visual change to the EASYJoint colour. Again, this will not affect the final integrity of the product in any way provided water can drain easily away and so allow even curing throughout the joints (as previously explained).The problem is that if you try to top up a joint it will not bond properly with the existing joint and over time the joint will fail. Over time, as rain and surface water pass through the porous joints between the paving slabs, this can lead to a little discolouration, with Algae, Lichen and Fungi growing between your paving joints.
Highly absorbent and porous stone will require sealing, 2-3 days prior to laying, on its top surface and four edges. EASYJoint brush-in patio grout , is a really simple, fast and DIY friendly way to fill the joints in paving slabs and flagstones.To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Once opened, the remaining product can still be used, in turn reducing waste and making the most of your money.
EASYJoint can be applied in virtually any weather conditions, however it is best practice to ensure that ground temperatures are greater than 3 degrees during the grout installation. This product was first developed in 2009 and has now evolved to meet user demands and keep up with the latest trends in the industry. Apply a final gentle spray of water across the surface to wash off any EASYJoint residue and to aid the final compaction process. When using EASYJoint the base and bedding, as always and continuously referred to in this instruction guide and elsewhere, must be permeable. When applying dry, EASYJoint compound must be compressed, by striking off with a pointing tool into the joints as it will not self-compact in the same way it does when applied with water.
Finally, using water helps to lift the linseed oil in the compound off the paving as it is less dense than water - preventing any potential temporary staining.