KSIPZE 30m Led Strip Lights RGB Music Sync Color Changing, Bluetooth Led Lights with Smart App Control Remote, Led Lights for Bedroom Room Lighting Flexible Home Decoration

Product Information

Wear safety glasses and protective gloves. It’s also a good idea to tie your hair up out of the way if it’s long, and avoid wearing loose clothing that could get caught. Soldering irons are super hot, so use caution when using them to avoid any injuries. [8] X Research source Music Sync】The built-in mic make the LED lights color-changing with the ambient music,easily create party atmosphere. If the Led Strip is not properly plugged in and doesn’t have power then your Ksipze may not be able to connect to Bluetooth. If the connection is loose, the LED strip may not receive enough power to connect to Bluetooth. If you’re having issues connecting your Ksipze Led Light Strip to Bluetooth, try the troubleshooting tips below to fix the problem:

Mark the strip lights where you’ll be cutting them. Referring to the measurements you took of your space, now measure the light strip to find out where you’ll need to cut it. Use a measuring tape to find the right spot, marking it with a piece of painter’s tape or a marker so you don’t forget where to cut the strip. If you’re not sure which strip connector to choose, look at the recommended strip connectors for the specific brand and type of strip light you’re using.Ricardo Mitchell. Electrician & Construction Professional, CN Coterie. Expert Interview. 28 January 2021. Step 3: Connect the power adapter to the light strip, making sure the positive and negative terminals are aligned correctly.

Step 3: Peel off the adhesive tape from the light strip and press it firmly onto the surface where you’ve cleaned and prepared. Interference from other devices can cause connectivity issues with your Ksipze LED light strip. Try turning off other Bluetooth devices in the area or moving the light strip to a different location to remove all interference. We have many professional factories, production and sales high quality products according to the needs of the customers. The cut points are usually located every few inches or so, depending on the model of the LED light strip that you have. How to Cut Ksipze Led Light Strip Prepare the wires by adding solder to the ends. This is called pre-tinning the wires. Use the soldering iron to add a little bit of solder to each end of however many wires you’re using. This helps makes the wires easier to attach to the strip. [9] X Research sourceThe line is the only place you can safely cut the LEDs. If you cut anywhere else, some of the LEDs won’t work. [2] X Expert Source Ricardo Mitchell Troubleshooting issues with your Light Strip can be frustrating if you don’t know what you’re doing, but with this article, you’ll be guided through the troubleshooting process to help you fix common problems with your Ksipze LED light strip. Yes, it is possible to cut Ksipze Led Lights! But it must be done properly to avoid damaging the Led Light.

Choose a well-ventilated area to do the soldering. Since you’re burning metal, the fumes aren’t super healthy for your lungs if you inhale them. Try to solder in a well-ventilated area, or open a window to let the air flow through. [7] X Research source Interference from other Bluetooth devices may also cause connectivity issues with your Ksipze LED light strip. Also, if other devices are already connected then your Light Strip won’t be able to connect to Bluetooth because only a limited number of devices can connect to Bluetooth. Turn off or disconnect other devices that may already be connected to your Bluetooth connection. Bluetooth unlike Wi-Fi has a limited number of devices that can connect to it which is usually one. Interference from other Bluetooth devices may be the reason why you’re having issues with your Ksipze LED light strip. Turn off other Bluetooth devices in the area or move the light strip to a different location to remove all interference. Once you have all the necessary items, follow these instructions to install your Ksipze LED light strip:

Step 4: Connect the power adapter to the light strip, making sure the positive and negative terminals are aligned correctly.

Cut along the marked cutting area using sharp scissors. Once you’ve found where you’d like to cut, use sharp scissors to carefully cut along the designated cutting line on the strip. If your lights are spread far apart, you may also use wire cutters, being careful not to damage the lights. [2] X Research source Connect the wires to the power source. Plug the other end of the wires into the power source. You may need to twist the wire ends and cover them with shrink tube or an end cap before testing the electrical circuit. Step 4: Insert the Ksipze LED light strip into the magnetic clips, pressing down firmly to ensure a secure hold. If your desired measurement doesn’t perfectly line up with marked cutting spots, you’ll still need to cut along the designated lines to ensure your lights work.A software issue with the app or Bluetooth connection itself may also be responsible for your device not connecting to Bluetooth. The built-in mic makes the LED lights color-changing with ambient music. You can easily create a party atmosphere with the Ksipze Led Light Strip. How Do I Reset My Ksipze Led Lights? Step 4: Clean and dry the surface where you want to install the light strip to ensure proper adhesion. Step 2: Cut the Ksipze LED light strip to the desired length using sharp scissors or a sharp knife, making sure to cut along the designated cut marks. Strives to color and illuminate the space in a smart way. We boast a powerful R&D team to keep close to the lasted technology for premium devices innovation.