Furniture Clinic Wood Stain (Antique Pine) – Fast Drying, Highly Concentrated, and Easy-to-Apply Wood Stain for All Indoor & Outdoor Wood – Water Based & Non-Toxic – 250ml

Product Information

In some cases, using a wood conditioner before staining can help minimize this issue by creating a more uniform surface for the stain to penetrate.

Even though staining both Pine and Birch are difficult, staining Birch is easier than staining Pine. Woods such as pine, maple and poplar vary significantly in density within a single board,” says Brandon Miller, staining expert and product manager at Rust-Oleum. And I can tell you from all of my experimenting that it doesn’t matter what kind of stain you’re using, you want to use wood conditioner. If you want to get a darker or lighter color better to go with a darker color stain of General Finishes oil-based gel stain. After the wood has dried completely it’ll start of getting true colors and you can easily decide whether it’s necessary to go for another coat of stain or not.

You’ll find me sharing bits of our home, including lots of DIY’s, along with some bread baking, healthy habits, and lessons learned. You can also use a wax or glaze with a cooler undertone to neutralize the warm hues and create a more subdued appearance.

You could also us a pre-stain conditioner, which is boiled Linseed Oil thinned down with Mineral Spirit. Because if you start the staining process when the dust is there, you’ll probably end up with a blotchy surface because dust blocks the way of stains from getting inside the wood. I just white washed my wood and feel like it’s not nearly as smooth but can’t find any info on that. You will also find all about the best woodworking tools, different types of wood, and everything else related to woodworking!Eradicate any dust with a tack cloth and administer additional polyurethane coats, repeating the sanding process between applications, until you reach the desired level of protection. With various wood conditioners available on the market, it can be overwhelming to choose the right one for your project. I apply polyurethane with a brush or even a foam paint roller (which I used when I painted my sideboard).

Tracking technologies that we enable are an essential part of the frameworks we have adopted to securely enable our digital ecosystem. Unless it got really wet and is now extremely rough, I would not sand it until after you apply poly at the end so you don’t remove any of the finish. Lastly, water-based stains are environmentally friendly and dry quickly but may raise the wood grain. If you don't see the colour you want listed below, you can also mix the different colours of stain together to achieve any colour of Wood Stain you need. You see, the softwood nature of pine, coupled with its contrasting grain patterns, can lead to a blotchy, uneven appearance when stained.Remember, you can always apply multiple layers of stain, allowing each one to dry before applying the next. In this section, we’ll compare oil-based and water-based topcoats, discuss the role of polyurethane in protecting your stained surface, and explore alternative topcoat options like General Finishes High Performance Topcoat, wax, and shellac. For those seeking a rustic or aged look, incorporating distressing techniques before staining and finishing can add character to pine wood.

I also like to use a foam brush or even a small paint brush for filling in those tiny little holes and crevices. Manns Pine Wood Stains are very easy to apply and have a good open time which helps to keep a wet edge, allowing time for tidying up runs and puddles. From oil-based and water-based stains, to gel stains, there are different colors, tones, and textures of wood stain to choose from.Wood can also only absorb so much stain before it becomes saturated and so any excess would then dry on the surface. We aim to become an FSC-certified supplier in the coming years and continue to strive for sustainability in our business wherever possible. Better not to go above 3 coatings because you might be ended up with a tacky surface that is hard to eliminate. Please Note: Special care should be taken when applying the first coat of this product over a water-based stain as excessive brush or roller strokes over the same area may potentially dislodge or drag the stain from the timber. If you notice any uneven areas, apply wood conditioner again to those areas before moving on to the staining process.